UTG M3L Multi-Shot Shotgun Full Stock

This multi-shot capability is accomplished by three separate barrels inside of the shotguns main outer barrel. Other multi-shot shotguns use just one inner barrel so the velocity and range of the BBs are far from consistent. When the UTG M3 shotgun is fired it sends three BBs streaking towards your target in spread pattern capable of taking out multiple targets. The barrels are mated to a honeycomb of three pistons which are powered by dual overlapping main springs so each BB travels at the same velocity. They leave the barrel in a tight group no wider than a penny and gradually spread out for a real scattergun effect. Because of this they are not the best at long range engagements but will unleash havoc in close quarter scenarios. The tightness of the spread can be varied by changing the weight of the BB. For a wide spread use .2g BBs and for tighter spreads use the heavier .23g or .25g BBs.

The UTG M3 is capable of Slam Firing however it is not recommended. Read more about Slam Firing.

Constructed out of heavy duty ABS with metal parts this shotgun is extremely solid. They used very few lead weights in this gun so it may be lighter than you would expect however do not let this fool you. The M3 is built like a tank. The pump action fits closely to the guide rails and is anchored to two metal action bars so when you rack the forearm it goes straight back without any flex. The butt pad, forearm and pistol grip also have a nice rubber like coating on them for extra grip. Metal parts include the magazine tube, front sling mount, loading gate, trigger and rear sling mount.

Its magazine looks exactly like a 12ga shotgun shell and is good for 10 shots. The shell is inserted into the loading port just forward of the trigger. Please note that due to the hinged design of the shells follower, on occasion the shell will hold only 29 BBs so your 10th shot might fire 2 BBs instead of 3. We have found this to be true with the Marui shells as well but UTG says they are working on a solution for future production.

True to its real steel, fire spitting counterpart, the UTG M3 packs a serious punch. Each BB is fired at 275 fps with the combined kinetic energy of 2.1 Joules. Needless to say this shotgun is devastating at close range. Please note that due to this massive power, the cocking effort on the M3 is slightly more difficult than your average airsoft gun.

Overall the UTG M3 is a solid, well built shotgun. With its massive power and multi-shot capability it is sure to become your next favorite spring gun.

Comes with: 2 shells, UTG speed loader, sling and cleaning rod. (note: shell color may vary)

WARNING: This shotgun MUST use Precision Ground or High Polished BBs weighing .2g or more. Use of .12g BBs or other generic .2g BBs will jam in the shells and will cause performance issues with the gun.

• Operation: Spring
• Fire mode/s: Manual cocking
• Muzzle velocity: 275 fps w/ .2g
• Effective range: 100 feet
• Ammo type: .2g - .25g
• Hop Up: Fixed
• Weight: 3.1 lbs
• Magazine capacity: 1 shell
• Locking slide: No
• Open ejection port: No
• Length: 35.5 inches
• Comes with orange tip

©2008 Shorty USA Inc. Property of Shorty USA Inc. Duplication for commercial purposes is expressly forbidden.